Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
D151D04
NON STANDARD
GENERAL FEATURES Total isolation micro solenoid valve: the actuator is totally isolated from the fluid so that the wetted parts are just the body and the diaphragm. Reduced internal volume: 67l. Possibility of disassembling for inspection. The parts subject to sliding friction are duly coated by PTFE (polytetrafluoroethylene) based self lubricating material. Suitable to shut off liquid and gaseous fluids (verify the compatibility of fluid with materials in contact). TECHNICAL FEATURES Maximum allowable pressure (PS) Opening time Closing time Fluid temperature Max viscosity
MATERIALS IN CONTACT WITH FLUID Body PA 12 (polyamide) Sealing EPDM COIL Continuous duty Encapsulation material Yoke Insulation class Ambient temperature Electric connections Protection degree Voltages DC
ED 100% PA (polyamide) fiberglass reinforced External in zinc plated steel F (155C) -10C +60C DIN 46340 - micro-connectors IP 65 (EN 60529) with plug connector 12-24V (+10% -5%)
(Other voltages on request)
Differential pressure (bar) Series and type Port size Orifice size (mm) p max p min Gases AC Sub-base 1,5 0 DC 2 Liquids AC DC 2 0,03 D151D04 ZE30A Kv (m3/h) Valve Coil Inrush Holding Power absorption Sealings AC (VA) DC (W) Notes Weight (kg)
EPDM
0,040
- Sealings : EPDM = Ethylene-propylene elastomer 1 - Suitable for vacuum at any port up to 530mmHg (0,7 bar)
0703/0809
NOTES
D151D04
NON STANDARD
SPARE PARTS
Kit description
Coil
Kit P.N.
ZE30A
Consisting of:
Coil pos. 1
THE VALIDITY OF REPORTED DATA IS REFERRED TO THE DATE OF ISSUE. POSSIBLE UPDATES ARE AVAILABLE ON REQUEST.