Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Page 1 of 14
Login Register
All torrents
Home Browse categories Upload Advanced search Community About Search cloud
Search
Location: Mininova > Categories > Software > Windows - Other > Cadence Orcad v16.0 - SHooTERS > Comments
General information
Details
Report a problem
The following 12 users said thanks to the torrent uploader: ASq2 from , chari09 from , ezraeel from , fankosh from , itsmedamnit from , khera_rishi from , MafiosoMIT from , nddb from , sandman059 from , slf_kafir from , Vaporlze, viajante from
1.
Posted by nil_bond_007
It was already uploaded here but thought a few extra seeds might be good. Enjoy my fellow pirate engineers
System notice: The name, description and/or subcategory of this torrent was edited by its uploader. (Mar 27 2008 at 15:49)
2.
Posted by nil_bond_007
Guys this version is not working ... in the end when u apply patch, the patch keeps on giving error "Wrong folder selected!" . Some guys at tpb are also having same problem ... i guess SHooTERS forgot to mention the folder or something is wrong with the patch. If anyone can solve this problem plz post here.
3.
Posted by aliensim
Program work well, you did something wrong, here's instruction set that can help you... Cadence.OrCad.v16.0 .install lic-manager .copy license_manager\* to lic-manager installdir .setup lic-server .install orcad .apply patch __________________ Have Fun with the next Nice Release from Team SHooTERS !!!
4.
Posted by aliensim
Better to disable firewall or make sure you donot block any of the orcad app nor the license manager Follow these Steps (NOTE there are slashes in the file paths like after C:. for some reason they dont appear when I post the comment) 1. Install the license manager first by choosing Set Up Licensing from setup.exe. Donot enter any paths. for license file. Leave it blank. 2. Copy the contents of license_manager from SHooTERS folder to installed dir C:OrCADlicense_manager. Overwrite files. 3. Open orcad16.lic (stored on the hard drive not from the CD) in text editor and replace this_host with the name of the Computer (in the first line of the file), and save the file. 4. Run setup again and choose Set up License and enter the path of license file C:OrCADlicense_managerorcad16.exe .Click Next. Ignore the failure error and press Cancel.
5.
Posted by aliensim
5. Run setup again, and choose Install products, enter port as 5280 and host id/name as the name of your Computer. Next select the apps you want to install. Leave the installinfo and contr.. file paths blank. 6. After the installation is completed, go to Start->Programs->Cadence License Manager->License Manager Tools and change the path of license file to C:OrCADlicense_managerorcad16.lic in the Config Services tab. (it would be some license.dat initially) 7. Click on Start Server button in the Satrt/Stop/Reread tab of the license manager utility. Next click on Reread License File. Wait for the reread operation to be completed (see status bar). 8. Now check if the Cadence License Manager service is running in the Control Panel->Administrator Tools->Services. 9. Now apply the patch
http://www.mininova.org/com/1274941
10/29/2009
Comments on Cadence Orcad v16.0 - SHooTERS : Software > Windows - Other - Minin... Page 2 of 14
10. Done
6.
Posted by aliensim
I'm looking for Capture CIS, it's working but did give result when I did some research, can someone know how to set the internet connection to make it work even if it's a crack version...
7.
Posted by imorph
thanks!! it's working
8.
Posted by croccifixio29
i have a problem i cannot do parametric sweep, or Montecarlo analysis. please help me.
9.
Posted by ycriogen
I`ve the same problem with croccifixio29( and v 15.7 do the same problem). I hope someone to find the problem. I think it is a crack problem. Help
10.
Posted by mdsamar
To aliensim, What nil_bond_007 seems to be correct. When i reached step-8 of your instructions, everything was going on well. But, when I executed the patch exe, there was an error message saying " Wrong Folder Selected". Can anyone tell me the reason/solution ? Is this because i am using Vista Ultimate? Maybe you did this on XP. If there is a solution for this, please post on this forum. Thanx
11.
Posted by left2write
Hi All, Where Can I find setup.exe?.. I couldn't find one. There are 2 files.. OrCad_v16.bin OrCad_v16.cue.. Can you please help me find setup.exe file?.
12.
Posted by Ga_forever
"Posted by left2write on Apr 12 2008 at 22:45 Hi All, Where Can I find setup.exe?.. I couldn't find one. There are 2 files.. OrCad_v16.bin OrCad_v16.cue.. Can you please help me find setup.exe file?." I think you completed download file, You should use Alcohol 50% or 120% to open file, one of them will have bigger size than use Alchol Program -> Open-> direct the folder contains 2 files(use all file function) -> Open OrCad_v16.bin. In list area right click on OrCad_v16.bin ->Mount on Device. Enjoy. P/s : you can search Alcohol 120% in this website.
http://www.mininova.org/com/1274941
10/29/2009
Comments on Cadence Orcad v16.0 - SHooTERS : Software > Windows - Other - Minin... Page 3 of 14
13.
Posted by masoodhashemy
Hi All, please help me! step 7 is not correct working! 7. Click on Start Server button in the Satrt/Stop/Reread tab of the license manager utility. Next click on Reread License File. Wait for the reread operation to be completed (see status bar). start successfully but Reread failed! thanx
14.
thanx
Posted by masoodhashemy
my problem is solved!
15.
Posted by imaginemsg
Having problem with this statement in the instruction text file "If you get the ERROR message "The procedure entry point RWSetO2K3Color could not be located in the dynamic link library RWUXThemeS.dll", go in to environment variables and move the link "%CDSROOT%\tools\bin" in the Path variable to the beginning of it." I am stuck becoz of this problem ... I am not able to understand that sentence please elaborate that..........
16.
Posted by herrvictor85
Hello, guys! I really need your help with this one. I read the tutorial a 1000 times and did the steps, including a new win xp install. I've Read the forum, which says the same thing as the tutorial... Now, at the end of the steps described in the readme.txt when applying the patch I get the same error as nil_bond_007 "wrong folder selected"...I use the default destination folder: c:\OrCAD\OrCAD_16.0\tools... It doesn't work! Ideas?? the tutorial doesnt say anything about changing the host id, i left it as default "07071982"...
17.
Posted by agondarenko
Hi All, please help me! I have same problem as masoodhashemy step 7 is not correct working! 7. Click on Start Server button in the Satrt/Stop/Reread tab of the license manager utility. Next click on Reread License File. Wait for the reread operation to be completed (see status bar). start successfully but Reread failed! thanx
18.
Posted by herrvictor85
i had the same problem, you must reinstall your componets with host_id/host_name when asked to enter the host name along with the port no 5280...
19.
Posted by herrvictor85
but i still get the "wrong file selected" error when applyig the patch!
http://www.mininova.org/com/1274941
10/29/2009
Comments on Cadence Orcad v16.0 - SHooTERS : Software > Windows - Other - Minin... Page 4 of 14
20.
Posted by Hazelnut12332
For all of you who are getting the "Wrong Folder Selected" Message, geez enough already - make sure when you select the products during the install that you select ALL of the products not the one you want. The patch looks for all products and the folders they are placed in so if you don't select them all you will get the error message
21.
Posted by herrvictor85
finally!!!! how on earth could i have known that i sould've selected all the products??? i believe all the tutorials say the same darn thing "select the products you want".... sorry for being that stupid...10x a lot anyways
22.
Hi,
Posted by LUIZF
I follow the steps, and when I run some program (LayoutPlus, p.e.), a mensage Box is show:
============================================================================= ERROR (LMF-02114): License call failed for feature LayoutPlus, version 16.000 and quantity 1. The license server search path defined as 5280@PROG;C:\ORCAD\license_manager\orcad.lic. The FLEXnet error message is a follows, FLEXnet ERROR(-8,0,0): Invelid(inconsistent) license key. Run 'lic_error LMF-02008' for more information.. Correct the error and click "Retry", or click "Cancel" to abort the program. -------- -------| Retry | |Cancel| -------- -------============================================================================
The License Manager Tools shows "Reread Server License File Completed", when I click in ReRead License manager. Please help me.
23.
Hi,
Posted by LUIZF
I follow the steps, and when I run some program (LayoutPlus, p.e.), a mensage Box is show:
============================================================================= ERROR (LMF-02114): License call failed for feature LayoutPlus, version 16.000 and quantity 1. The license server search path defined as 5280@PROG;C:\ORCAD\license_manager\orcad.lic. The FLEXnet error message is a follows, FLEXnet ERROR(-8,0,0): Invelid(inconsistent) license key. Run 'lic_error LMF-02008' for more information.. Correct the error and click "Retry", or click "Cancel" to abort the program. -------- -------| Retry | |Cancel| -------- -------============================================================================
The License Manager Tools shows "Reread Server License File Completed", when I click in ReRead License manager. Please help me.
24.
Posted by slf_kafir
Those who get "reread failed" under vista , try selecting "LMTOOLS ignores license path environment variables" in Licence Manager service/license file tab.... It worked for me. But still have error messages when starting the sofware.
http://www.mininova.org/com/1274941
10/29/2009
Comments on Cadence Orcad v16.0 - SHooTERS : Software > Windows - Other - Minin... Page 5 of 14
25.
Did it
Posted by slf_kafir
Then go to your enviornment variables My Computer > Properties > Advanced System Settings and select environment variables . Then under system variables create a New varable Varaiable name: PATH Varaiable value : %CDSROOT%\tools\bin press OK.... now it should work
26.
Hi,
Posted by atomfred
everything written in the upper manual worked fine but i still have a similar error message like LUIZF. Only if i want to start one the programs i get this error message. i've got no idea what i should do...someone can help me? ############################################################################# ERROR(LMF-02015): License call failed for feature CaptureCIS, version 16.000 and quantity 1. The license server search path is defined as 5280@atomfred. The FLEXnet error message is as follows, FLEXnet ERROR(-15,0,0): Cannot connect to license server system. Run 'lic_error LMF-02015' for more information.. Correct the error and click "Retry", or click "Cancel" to abort the program. ############################################################################# I already had spent a lot of time in installing Orcad16...someone must help me... thanx
27.
Posted by Nuoz
Have you guys tried to use this program? From all of you, only two persons have noticed that the program is not functioning correctly. Monte carlo simulation and transient simulation are off! Same problem i had in 15.7. thus making this whole thing pointless because you cant use it for anything really.
28.
Posted by Nuoz
same problem that the 15.7 version has this one has it too, if this cant be fixed u better of using the student limited version that is free. Monte carlo simulation and transient simulation are not working thus making this program useless.. Get the Shooters need some engeniers in their group before trying to crack eng. programs.
29.
Posted by Nuoz
and i also notice that when u pressed F1 in 15.7, the help was not linked with the content.. on this version, the first time u press it comes up a dialogue that lets u insert the right patch so it can detect the help files. but in both the Monte carlo simulation and transient simulation are off.
30.
Posted by harkirat_777
hey plz plz can sombody hlp me?????? im stuck on step 7th--7. Click on Start Server button in the Satrt/Stop/Reread tab of the license manager utility. Next click on Reread License File. Wait for the reread operation to be completed (see status bar).
31.
Posted by ASq2
http://www.mininova.org/com/1274941
10/29/2009
Comments on Cadence Orcad v16.0 - SHooTERS : Software > Windows - Other - Minin... Page 6 of 14
Monte Carlo & Optimizer you'll find in (OrCad Capture CIS menu) PSpice->Advanced Analysis
32.
@harkirat
Posted by ronte
Make sure you filled in your computer's name properly in the .lic file.
33.
Posted by get_smart_86
Thanks to all for sharing! I installed and it worked fine on two computers. I just have one problem. The Layout PLUS part of the software doesn't run. Any suggestions?
34.
Posted by lightheart27
Problem: LMTOOLS unable to connect to Reread licence file and getting license error dialog when starting an OrCAD tool. After trying several hours and absolutely unable to get it to work I found out two important things: 1) LMTools: Tab Config Services Setup Path to lisence file: C:\OrCAD\license_manager\orcad16.lic 2) Environment variable: CDS_LIC_FILE has to be c:\OrCAD\license_manager\orcad16.lic Then I was able to ReRead licence file succesfully: ReRead Server Licence File Completed, and start one of the OrCADtools without this Error (LMF02097). Note: I hope this is everything, cause while trying everything I also downloaded a new LMTOOLS version 11.6, and also the latest lmgrd.exe und lmutil.exe Hope this helps anyone Michael
35.
Posted by jwt2368
Need some help here. During the installation, it asks for 'data3.cab' from CD2. It cannot find it anywhere on the disk. I have to abort the installation once this occurs. Please help.
36.
Posted by ManInWhite78
Need help in emergency Step 7 : when I click on Start Server button in the Satrt/Stop/Reread tab of the license manager utility, then save, a message appears << Failed to change FLEXIm Server. You need to be an Administrator to perform this function. Note:Im the admin, its my laptop, I use vista. Thanks
37.
Posted by ManInWhite78
Need help in emergency Step 7 : when I click on Start Server button in the Satrt/Stop/Reread tab of the license manager utility, then when I click Save Service, a message appears << Failed to change FLEXIm Server. You need to be an Administrator to perform this function>>. Note:Im the admin, its my laptop and I use vista. Thanks
http://www.mininova.org/com/1274941
10/29/2009
Comments on Cadence Orcad v16.0 - SHooTERS : Software > Windows - Other - Minin... Page 7 of 14
38.
Posted by ManInWhite78
PLZ PLZ PLZ I can you help me Step 7 : when I click on Start Server button in the Satrt/Stop/Reread tab of the license manager utility, then when I click Save Service, a message appears << Failed to change FLEXIm Server. You need to be an Administrator to perform this function>>. Note:Im the admin, its my laptop and I use vista. Thanks
39.
Posted by ManInWhite78
hey, Im blocked , how can I surpass this error, all steps was good, but when I excute capture or an oher application, an error apears: Entry Point Not Found, "The procedure entry RWResetO2K#Colors could not be found located in the dynamic link library TWUXThemeS.dll" Please help, thankx
40.
Posted by ManInWhite78
hey, Im blocked , how can I surpass this error, all steps was good, but when I excute capture or an oher application, an error apears: Entry Point Not Found, "The procedure entry RWResetO2K#Colors could not be found located in the dynamic link library RWUXThemeS.dll" Please help, thankx
41.
Posted by fedUpEngineer
This is s.... don't waste your time to make it work. It won't until some lazy engineer out there get his ass up and provide some step-by-step detailed instructions on how to do it correctly
42.
Posted by strangluv
From: \OrCAD\OrCAD_16.0\tools\bin Copy: RWUXThemeS.dll RWUXThemeSU.dll To: \OrCAD\OrCAD_16.0\tools\capture \OrCAD\OrCAD_16.0\tools\pspice \OrCAD\OrCAD_16.0\tools\fet\bin \OrCAD\OrCAD_16.0\tools\pcb\bin Strangluv
43.
Posted by abbeyromy
hi techies.... seriously need ur expert comments I got this problem During the installation, it asks for 'data3.cab' from CD2. It cannot find it anywhere on the disk. I have to abort the installation once this occurs. Please help. same thing was faced by one guy i did not find any solution given on that boss, i seriously want to install and use the software, i am into pcb design and this could help me practice at home. please post something over this..it may be that data3.cab is corrupted can somebody suggest me some thing
http://www.mininova.org/com/1274941
10/29/2009
Comments on Cadence Orcad v16.0 - SHooTERS : Software > Windows - Other - Minin... Page 8 of 14
44.
Posted by abbeyromy
please help boss i am waiting for ur suggestion.... not able to access data3.cab from cd2..what could be the reason???
45.
Posted by alvarado2421
Hello Guys please help me I am new to torrents download and I have downloaded the torrent for cadence orcad 16 shooters but I am new to this and I can not find the set.up file where is it? I see two folders CD1 and CD2 and also a read me text file which I read already and I can not go beyond step 1. Please some one be nice and explain to me exactly what I need to do I am using a PC windows and I guess I am stupid for not knowing how to install the full program but please be nice and walk and entry engineering student through the steps...thanks
46.
Posted by tigzy
47.
Posted by tigzy
48.
Posted by neverusedname
The installation works fine but i get the same error as LUIZF (post 22) atomfred (post 26)when i try to start any app.Could anybody help ?
49.
Posted by neverusedname
sorry.I had forgotten to apply the patch.Works fine now @tigzy:did not find any virus in splash.exe. I used KIS 7 to scan it. @ alvarado2421:go to CD1 folder and unrar "orcad16a.r00" using winrar or equivalent to a suitable destinantion folder.In CD2, unrar "orcad16b.r00" to the same destination folder.You will end up with the following images: OrCad_v16.bin OrCad_v16.cue OrCad_16b.bin OrCad_16b.cue Use a virtual drive to mount OrCad_v16.cue and start install. @ abbeyromy:when it asks for the cab file, mount the OrCad_16b.cue image and proceed.
50.
Posted by tigzy
So your AV ****s! I tell you that there is a trojan, i will not re-DL to say you what kinda trojan it is but i'm sure of that. If i where you i'll scanning it whith lot of Av including Avira Antivir If this archive is clean can you explain WHY the uploader put this "splash.exe" into the autorun folder, and WHY only that one is detected as trojan? I don't trust into that torrent, I'll get another one
51.
Posted by lahmitia
http://www.mininova.org/com/1274941
10/29/2009
Comments on Cadence Orcad v16.0 - SHooTERS : Software > Windows - Other - Minin... Page 9 of 14
52.
Posted by Fhoex
OrCAD v16 It's Work!! Problem with the patch? Solution: ========= At the time of selecting products, you have to SELECT ALL! so that when using the patch will not be problems. With regard to the implementation of the license, install it in 8 PC's windows xp and did not present problems. Check this graphic manual -> http://chetzdownload.********.com/2008/02/download-cadence-orcad-16-shooters.html +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ If someone wants to install only a few products, as you may have problems with the patch "Wrong folder selected!". But if it succeeds, please post as he did please .
53.
Posted by pcbguy
Need Help Please I am stuck on step 5. The installer seems to get hung up after all of the files are installed. The last message that I received indicated that is was checking for uniqueness or something like that. If I stop the installer, I don't have any way to launch the program. I am able to get the server running, but I just can't seem to get the program installed.
54.
Posted by Lethrblaka
help plixxxx i got the error: ERROR LMF-01001: License call failed. The license server search path is defined as D:/... (where i installed the LM). The FLEXnet error message is as follows, FLEXnet ERROR (-1,212,2): Cannot find license file Run lic_error LMF-01001 for more info... What should i doooooooooooooo XDXDXD i need this program 4 school, and i'm using vista... if ya donno how to fix it can ya plz tell me another version of Orcad that surely can be cracked on Vista?? plzzzz
55.
Posted by s3xs1
Hello! It has a problem in Layout. It opens *.max files with Layout Engineers' Edition and this version does not have autoroute. I tried to modify the settings in OrCAD Layout to open with Layout Plus, but it gives me an error: .... something related to the version. Use the old and fully working OrCAD 9.2 for autoroute. This is the only bug I've discovered so far.
56.
Posted by Fhoex
57.
Hi,
Posted by BoogyFunk
I have a problem LMTOOLS do not find any server, my CDS_LIC_FILE is set to the orcad16.lic and I entered my computer name etc. I do not understand what I did wrong. COuld you help here? Thanks
58.
Posted by BoogyFunk
Sorry Was tired I meant LMTOOLS cannot reread the licence file after connecting successfully the server, even with my CDS_LIC_FILE set to the orcad16.lic file. Thanks for your help
http://www.mininova.org/com/1274941
10/29/2009
Comments on Cadence Orcad v16.0 - SHooTERS : Software > Windows - Other - Min... Page 10 of 14
59. 60.
Posted by bbblue
Posted by bbblue
Why does it have to allow all those many files in the firewall?? hum! It does not seem to work with the local license file(only network). when undoing the network connection it hung. is this spyware?
61.
Posted by KROOVI
I've downloaded and installed and patched yet.. when I enter the 'License Manager Tools' I get a "License Server Not Found" error message and am not able to 'Reread License File'. Therefore, OrCAD does not run. I need OrCAD to run. Please assist amigos I know that there's a kind amigo out there who happen to know the answer, please reach out and fix, together we can make a difference. (I changed the .lic to my comp. name, and generally did everything told in order. working under vista)
62.
Posted by itsmedamnit
Whew! you need some kind of batch file or macro to exacute this one. It took me 3 hours but I finally got it working.... Anwsers were all in these comments. So keep trying guys. Seriously. You should come up with a better way to do this... But THANKS!
63.
Posted by JETEE
I am trying to download but step 9; "Run Orcad_16.0_patcher.exe", I cannot locate the patcher.exe. An suggestions. Thanks.
64.
Posted by christosxo
hello everybody i have problem with step 7 . there isn't start server button.... someone help me please !!!!
65.
Posted by seniyan
wow! It works! thanks!!! Example.. editing orcad16.lic If your computer name is aaa, edit like this using notepad. ===================================== SERVER this_host ID=07071982 5280 ... ... ... ===================================== ===================================== SERVER aaa ID=07071982 5280 ... ... ... =====================================
http://www.mininova.org/com/1274941
10/29/2009
Comments on Cadence Orcad v16.0 - SHooTERS : Software > Windows - Other - Min... Page 11 of 14
66.
Posted by Nuoz
Hey guys please, is the monte carlo and parametric sim problem solved yet? you guys seem all worried about cracking it, but you DONT USE THE ****ING PROGRAM! damn this is ******* me off because there is a bunch of kids that wanna install it, but NOONE until now realised this PROGRAM DOESNT WORK!!!! parametric and monte carlo sims are greyed out! this is not fully cracked! it seems this program wont ever be cracked because the people doing the cracking DONT KNOW A GOD DAMN THING about USING THE PROGRAM!!! i am ****** off!
67.
Posted by captain-flint
Does parametric simulation work for anyone, Nuoz comments causes grave concern. Anyways - I am stuck with the very installation process. I could not proceed to step 6. 6. After the installation is completed, go to Start->Programs->Cadence License Manager->License Manager Tools and change the path of license file to sC:OrCAD\license_manager\orcad16.lic in the Config Services tab. (it would be some license.dat initially) However, it is listed as Start->Programs->OrCAD 16.0 in my system, how do I access the Cadence License Manager? or perform step 6.
68.
Hello,
Posted by andrefleitao
i'm at point 7 and i don't know why the program says de licence was not found At the end of the LMTOOLS box says this: Using License File: C:\OrCAD\license_manager\orcad16.lic so it should recognise it like the licence this licence was changed like it says in the tutorial: Editing orcad16.lic my pc name is: PC321501422279 ===================================== SERVER this_host ID=07071982 5280 ... ... ... ===================================== i did this ===================================== SERVER PC321501422279 ID=07071982 5280 ... ... ... ===================================== whats wrong with it?
69.
Posted by andrefleitao
i found the problem it looks like i miss the box "CONFIG SERVICES" in LMTOOLS where i should enter in the box Path to the licence file: C:\OrCAD\license_manager\orcad16.lic then SAVE SERVICE then all the programs work!! hehe
70.
Posted by technomudit
For people with VISTA Step 7 : when I click on Start Server button in the Satrt/Stop/Reread tab of the license manager utility, then when I click Save Service, a message appears << Failed to change FLEXIm Server. You need to be an Administrator to perform this function>>. Note:Im the admin, its my laptop and I use vista.
http://www.mininova.org/com/1274941
10/29/2009
Comments on Cadence Orcad v16.0 - SHooTERS : Software > Windows - Other - Min... Page 12 of 14
You need to change your user settings. Vista controls the administrator settings. you need to turn it off. you'll find it in user settings!
71.
Posted by technomudit
My layout doesn't works!! I have installed it on Vista home edition. as stated above. but now if i try to open .max file in layout, it gives error about Layout.exe and closes the application!
72.
Posted by Evilsonic85
FOR THE PeoPLe WITH PROBLEMS IN STEP 7, lightheart27 almost got it but the variable name was a little different his post with the variable name changed: " Problem: LMTOOLS unable to connect to Reread licence file and getting license error dialog when starting an OrCAD tool. After trying several hours and absolutely unable to get it to work I found out two important things: 1) LMTools: Tab Config Services Setup Path to lisence file: C:\OrCAD\license_manager\orcad16.lic 2) Environment variable: LM_LICENSE_FILE has to be c:\OrCAD\license_manager\orcad16.lic Then I was able to ReRead licence file succesfully: ReRead Server Licence File Completed, and start one of the OrCADtools without this Error (LMF02097). ... "
73.
Posted by Bawoni08
I installed it successfully on Win XP and Vista (PC and Laptops). The only change you need on Vista is to turn Off UAC - User Account Control. control Panel> user accounts and family safety>User Accounts>Turn user account control ON or Off. At this point, just uncheck UAC box, then click OK Now install Orcad and enjoy!!!
74.
Posted by tadyatha
75.
Thanks
Posted by viajante
Hi, I tried to install Orcad 16.0 but when I tried to run orcad_16.0_patcher.exe inside Shooters folder it gave me a error access!!! Anyone can give me this file ou put here an link where I can download this file???
76.
Posted by viajante
I need Help
77.
Posted by seniyan
78.
Posted by Joseijosei
http://www.mininova.org/com/1274941
10/29/2009
Comments on Cadence Orcad v16.0 - SHooTERS : Software > Windows - Other - Min... Page 13 of 14
it doesn't work... monte carlo and parametric sweep are greyed out thus making it completely useless.
79.
Posted by avihay
parametric sweep&monte carlo is working you just need to this: copy file SimSetup.dll from dir \tools\PatchWise.bak to dir \tools\pspice (override) and that is all enjoy
80.
Posted by chari09
81.
Posted by gusoft
I have installed it in my Laptop and it seems to be working. However, the wireless connection stopped working. My operative system is Windows XP. I guess that the problem should be related to the router or to the conection definition. Did anyone see such problem in the past? What could be the possible solution?
82.
Posted by 4br4c4d4br4
[Quote] parametric sweep&monte carlo is working you just need to this: copy file SimSetup.dll from dir \tools\PatchWise.bak to dir \tools\pspice (override) and that is all enjoy [\Quote]
There is no such directory: \tools\PatchWise.bak Did anyone else got the parametric sweep option started?
83.
Quote
Posted by nav1
"parametric sweep&monte carlo is working you just need to this: copy file SimSetup.dll from dir \tools\PatchWise.bak to dir \tools\pspice (override) and that is all"
Yes, it works very well.....thank avihay 4br.... I can send you the file if you want
84.
Posted by carlitosgve
First I want to thank you, thanks to this page i have already installed the Orcad 16.0 on windows vista. At the beginning it did not work but after following some of the extra comments of this page i was able to run the Orcad Capture. Currently I have a problem running the Orcad Layout. When i run this application I got the next window message "Key not defined". Do you have an idea of what is going on? I re-installed the Orcad and used the "Windows compatibility wizard but I got the same problem. Please help. P.D I got the same problem when I installed a 10.3 Version, for that reason i tried to get a newer version as this one.
85.
Posted by arunarunss
http://www.mininova.org/com/1274941
10/29/2009
Comments on Cadence Orcad v16.0 - SHooTERS : Software > Windows - Other - Min... Page 14 of 14
86.
Posted by pes88
87.
Posted by Eng_GeOvIeS
88.
Posted by simple-guy
GUYs,need some serious help here.I have Vista SP2. Having same step7 error of not rereading license file. Can somebody post step by step instructions, as I am not a software guy!! Pls note, I have followed every instruction posted here for Vista installation. Thanx in advance.
89.
Posted by wexico
I have downloaded this file but the cab file data3.cab is corrupted and therefore cannot be mounted to a drive. I have tried extracting the contents of the file but to no avail. i dont understand how any of you have completed the installation of this program with this apparent problem in place. I have never had any problems with any of the previously cracked versions of orcad til now. What is going on? If some1 would b so kind to let me know how they got this working I wud be happy to know at tmcg01 at g mail c*m. Im ***** disgusted i spent two hours doing this with no results. The cab file simply cannot be mounted so i feel the torrent was either changed in the last 2months or anyone that posted was telling porkies when they say they got it working. Altho, im gonna tend toward the fact im running vista home.....what a **** os. grrrrrrh Can anyone help? Thanx Tommy
90.
Posted by Khuni_Darinda
############################################################################# ERROR(LMF-02015): License call failed for feature CaptureCIS, version 16.000 and quantity 1. The license server search path is defined as 5280@atomfred. The FLEXnet error message is as follows, FLEXnet ERROR(-15,0,0): Cannot connect to license server system. Run 'lic_error LMF-02015' for more information.. Correct the error and click "Retry", or click "Cancel" to abort the program. ############################################################################# did anybody found an way around this problem....i want to use this s/w so desperately and got stuck at this last point... anyways thanks shooter
XHTML | CSS |
Mininova toolbar |
LightTPD
More info:
http://www.mininova.org/com/1274941
10/29/2009